Description
R32 GTR Fuel System Instructions
This pump bracket is designed to mount two Walbro 450 style pumps in the R32 GTR tank.
Benefits of this bracket:
– No in-tank assembly. The pumps clamp to the bracket and then drop into the tank as one unit.
– No need to remove the tank from the car to install
– No modifications to the factory tank
– Clamps into the factory fuel pump mount
– Easy install and removal (pumps can be removed in seconds once the fuel hat is off)
– Designed for use with the factory fuel hat. This keeps the factory level gauge sending units intact.
– Moves the pumps 7 inches closer to the center of the tank to help reduce fuel surge under hard right cornering
Items included:
– Bracket with integrated clamp bolts and sandwich plate
– Fuel pump clamps
– Nylon cap nuts for sandwich plate
– Fuel pumps and connectors not included –
This is as simple as it gets and is budget friendly. I have this in my personal car. We have gone as quick as a 1.39 60′ at the track with just under 1/3 tank and no fuel surge. Get the fuel your R32 GTR needs without breaking the bank.
Notes: If you are running a boost referenced fuel pressure regulator you must run at least 12ga. wire as power and ground to each pump individually. Do not use the factory connector. The pins cannot take the amperage.
You MUST use submersible fuel line for this application.
